NOTE
When you use Wi-Fi access service in the PPPoE mode, if DHCP is used, you need to set
Bridge Type to IP_Bridged and enable the DHCP relay function. For procedure details, see
5.3.3 DHCP Server Configuration.
c. Click Apply to apply the configuration.
3. Save the configuration.
Choose System Tools > Configuration File from the navigation tree. In the right
pane, click Save Configuration.
4. Check the ONT connection status.
In the navigation tree, choose Status > WAN Information. In the right pane, User
Status is Connected.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual 3 Configuration
Issue 02 (2011-12-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
231
To Next Page
Loading...
Need help?
General
