Huawei ePico3801 - Figure 2-3 Ports and Buttons on the Panel of the Epico3801; Table 2-1 Functions of the Ports and Buttons of the Epico3801

Figure 2-3 Ports and buttons on the panel of the ePico3801
Table 2-1 describes the functions of the ports and buttons of the ePico3801.
Table 2-1 Functions of the ports and buttons of the ePico3801
SN
Port or Button Function
1 LAN This port is used for both services and commissioning.
An Ethernet cable connected to this port connects the
ePico3801 to the Ethernet transmission equipment.
When the PoE power supply is used, this port is used
to provide the working power supply for the
ePico3801.
2
PWR This port is connected to an AC/DC power adapter to
provide the 12 V DC power supply.
3 GPS This port is the external GPS antenna port.
4 ANT/A This port is the external UMTS antenna port.
5 SIM CARD This port is used to hold the USIM or SIM card.
ePico3801
User Guide 2 Introduction to the ePico3801
Issue 01 (2009–09–23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2-7