Huawei ePico3801 - Configuring the Emergency Call Redirection Switch; Modifying the Access Reject Reason

NOTE
For details about how to set the parameters, see Help in the corresponding configuration window.
Step 3 After the parameter setting is complete, click Apply. A system message is displayed, indicating
whether the parameter setting is successful.
----End
5.6.2 Configuring the Emergency Call Redirection Switch
This chapter describes how to configure the emergency call redirection switch on the AP
Manager (APM) so that the emergency calls can be made in other cells.
Prerequisite
l The parameters of the ePico zone have been set successfully.
l You have logged in to the APM. The login account belongs to the Administrator or
Operators group.
Context
The emergency call redirection function can be activated by parameter setting. After this function
is activated, the emergency calls can be redirected to inter-frequency or inter-RAT neighboring
cells (inter-frequency neighboring cells are preferred). If there is no inter-frequency or inter-
RAT neighboring cell around the ePico cell, the emergency calls are still initiated from the ePico
cell.
Procedure
Step 1 Log in to the APM. Choose Configuration > Single Configuration and select an ePico3801 to
be maintained. Then, click Configure to enter the configuration window.
Step 2 Choose Terminal Parameter > WIRELESS > Configuration > CORRMALGOSWITCH
in the navigation tree to configure the emergency call redirection switch.
NOTE
For details about how to set the parameters, see Help in the corresponding configuration window.
Step 3 After the parameter setting is complete, click Apply. A system message is displayed, indicating
whether the parameter setting is successful.
----End
5.6.3 Modifying the Access Reject Reason
This chapter describes how to manually modify the UE access reject reason on the AP Manager
(APM). The reject reason can be configured as required.
Prerequisite
l The parameters of the ePico zone have been set successfully.
l You have logged in to the APM. The login account belongs to the Administrator or
Operators group.
5 Reconfiguring the ePico3801
ePico3801
User Guide
5-14 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2009–09–23)