Power Consumption Specifications
Table 2-10 Power Consumption Specifications of the ePico3801
Item Specification
The TX power is 100 mW
(20 dBm).
AC/DC power adapter
≤ 28W
PoE power supply
≤ 30W
The TX power is 250 mW
(24 dBm).
AC/DC power adapter
≤ 32W
PoE power supply
≤ 35W
Environmental Specifications
Table 2-11 Environmental specifications of the ePico3801
Item Specification
Temperature Operating temperature: -5°C to +40°C
Storage temperature:-40°C to +70°C
Relative humidity Relative humidity of the operating
environment: 5% RH to 95% RH
Relative humidity of the storage
environment: 5% RH to 95% RH
Altitude -60 m to +4000 m
Air pressure 70 kPa to 106 kPa
2.5 Application Scenarios
The ePico3801 is widely used for indoor coverage in small and medium enterprises (SMEs),
SOHOs, schools, and office buildings and for hot-spot indoor coverage at pubs, airports, stores,
and hotels.
2.5.1 Access Networking Scenarios
The ePico3801 is connected to an enterprise LAN or modem, which connects the ePico3801 to
the public IP network. Then, the public IP network connects the ePico3801 to the AG, and the
AG connects the ePico3801 to the UMTS core network. Through convergence and UMTS traffic
and signaling forwarding performed by the AG, routing towards the UMTS core network is
achieved. The ePico3801 can be connected to the public IP network in LAN access mode or
modem access mode.
2.5.2 Installation Scenarios
If installed in a factory or office building, the ePico3801 does not require a private equipment
room.
ePico3801
User Guide 2 Introduction to the ePico3801
Issue 01 (2009–09–23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2-15
To Next Page
Loading...
