4.1 Commissioning Procedure
This chapter describes the prerequisites, required resources, and procedure of the ePico3801
commissioning.
Prerequisite
l The NEs including the SeGW, AAA, APM, AHR, IP clock, and AG involved in the uBro
solution are running properly. The network transmission is normal.
l The initial configuration of the ePico3801 is complete.
Commissioning Resources
Table 4-1 describes the tools required for ePico3801 commissioning.
Table 4-1 Tools for ePico3801 commissioning
Tool Quantity Description
PC 1 Log in to ePico local
maintenance IP address
through a PC to perform local
commissioning, or log in to
the AP Manager (APM) to
perform commissioning.
UE 2 Use the UEs to make call tests
on ePico3801 services.
Fixed-line telephone 1 Use the fixed-line telephone
to make call tests on
ePico3801 services.
The following basic information must be obtained before the commissioning.
l The networking mode and transmission mode of the ePico3801 are available.
l The required software version and basic configuration data of the ePico3801 are available.
Commissioning Procedures
Figure 4-1 shows the procedures for commissioning the ePico3801.
4 Commissioning the ePico3801
ePico3801
User Guide
4-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2009–09–23)
To Next Page
Loading...
