Huawei ePico3801 - Physical and Electrical Specifications; Table 2-9 Physical Specifications of the Epico3801

Item Specification
UE mobility Supporting the processes of addition,
removal, and replacement in soft handovers
that comply with the Uu interface protocols
of 3GPP, thereby ensuring the mobility of
UEs
Supporting static relocation that complies
with the Uu interface protocol of 3GPP
Supporting reselection and handovers
between ePico cells, between ePico cells and
UMTS macro cells, and between ePico cells
and inter-RAT cells.
Supporting redirection to inter-RAT and
inter-frequency cells for UEs that exceed the
specifications
Supporting access handovers for PS and VP
UEs that exceed the specifications
NOTE
l Users that have only CS services are known as CS users. Users that have PS services are known as PS
users. PS users can also have CS services.
l Among the three PS services in the maximum service combination of a single user, one service is
carried by IMS.
2.4.2 Physical and Electrical specifications
The physical and electrical specifications of the ePico3801 are its physical specifications, power
consumption specifications, and environmental specifications.
Physical Specifications
Table 2-9 Physical specifications of the ePico3801
Item
Specification
Dimensions (length x width x height) 250 mm x 60 mm x 175 mm
Weight
≤ 2 kg
Volume
≤ 2.5 L
Transmission port One FE port
Protection rate IP30
Mean Time Between Failures 88,861 hours
2 Introduction to the ePico3801
ePico3801
User Guide
2-14 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2009–09–23)