Huawei FusionDC1000A - Page 75

(9) LAN2/POE (10) WAN2 (11) COM4/CAN (12) COM2/AIDI_5
(13) AIDI_3 (14) DO/12V (15) RF_Z (16) WLAN
(17) 4G (18) SW button
Figure 6-6 ECC800-Pro main control module (side view)
(1) SIM card slot (2) Micro-SD card slot (reserved)
Technical Specications
Table 6-5 Technical specications of the ECC800-Pro main control module
Item
Specications
Power input ● Supports one AC input or two AC inputs
● Rated voltage: 200–240 V AC
● Rated frequency: 50 Hz or 60 Hz
Power output ● Output voltage: 42–58 V DC (rated voltage: 53.5 V DC)
● Output power of two power module supplies: 2000 W (176–
300 V AC); 940 W (linear derating at 85–175 V AC)
● Output power of a single power module supply: 1000 W
(176–300 V AC); 470 W (linear derating at 85–175 V AC)
WAN port ● Supports two WAN ports, which can be connected to the
management systems of two customers. The ports support
autonegotiation of 10/100/1000 Mbit/s communication
rates.
● Connect shielded network cables to the WAN ports.
LAN port ● Supports two LAN ports, which can be connected to the
LAN. The ports support autonegotiation of 10/100/1000
Mbit/s communication rates.
● Connect shielded network cables to the LAN ports.
FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario) 6 Management System
Issue 01 (2021-04-20) Copyright © Huawei Technologies Co., Ltd. 68