Huawei FusionDC1000A - Page 77

Item Specications
USB ● Supports USB 2.0 and 5 V, 1 A power supply.
● After installing the WiFi module, connect the WiFi module
to the ECC800-Pro using the app on the mobile phone or
tablet computer to view the basic information about the
smart module, such as layout, resources, energy eciency,
environment, and alarms.
● You can insert a USB ash drive to export historical data
and conguration les and import conguration les.
SW Button ● Restores the default IP address, factory settings, and user
information.
● Supports RF_Z networking.
Table 6-6 ECC800-Pro RF_Z parameters
Item Specications
RF_Z Operation
Frequency
2405–2480 MHz
RF_Z EIRP (max.) 8 dBm
Table 6-7 ECC800-Pro 4G parameters
Item
Specications
3G/4G Operation
Frequency
LTE (FDD): BAND1, BAND2, BAND3, BAND4, BAND5,
BAND7, BAND8, BAND20
DC-HSPA+/HSPA+/HSPA/UMTS: 850/900/1900/2100
MHz
GSM/GPRS/EDGE: 850/900/1800/1900 MHz
3G/4G EIRP (max.) 23 dBm
Communications Port
Figure 6-7 RJ45 port pins
FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario) 6 Management System
Issue 01 (2021-04-20) Copyright © Huawei Technologies Co., Ltd. 70