Huawei FusionServer Pro 2488 V5 - Memory Installation Guidelines; Memory Installation Positions

5.4.4 Memory Installation Guidelines
● Observe the following when conguring DDR4 DIMMs:
– Install DIMMs only when corresponding processors are installed.
– Do not install LRDIMMs and RDIMMs in the same server.
– Install
ller DIMMs in vacant slots.
● Observe the following when conguring DDR4 DIMMs in specic operating
mode:
– Memory sparing mode
▪ Comply with the general installation guidelines.
▪ Each memory channel must have a valid online spare conguration.
▪ The channels can have dierent online spare congurations.
▪ Each populated channel must have a spare rank.
– Memory mirroring mode
▪ Comply with the general installation guidelines.
▪
Each processor supports two integrated memory controllers (IMCs).
At least two channels of each IMC are used for installing DIMMs
(channels 1 and 2, or channels 1, 2, and 3). The DIMMs installed
must be identical in size and organization.
▪
For a multi-processor
conguration, each processor must have a
valid memory mirroring conguration.
– Memory scrubbing mode
▪
Comply with the general installation guidelines.
5.4.5 Memory Installation Positions
A 2488 V5 supports a maximum of 32 DDR4 DIMMs. To maximize the
performance, balance the total memory capacity between the installed processors
and load the channels similarly whenever possible.
NO TICE
At least one DDR4 DIMM must be installed in the memory slots corresponding to
CPU 1.
Huawei FusionServer Pro 2488 V5 Server
Technical White Paper 5 Hardware Description
Issue 11 (2020-09-03) Copyright © Huawei Technologies Co., Ltd. 27