Huawei FusionServer Pro 5288 V5 - Page 73

Category Specications
● Supports SAS HBA cards or SAS RAID controller card
(with a 1 GB, 2 GB, or 4 GB cache) to improve
storage performance and data security.
NOTE
If the BIOS is in legacy mode, the 4K drive cannot be used as
the boot drive.
Network ports Supports expansion capability of multiple types of
networks.
● LOM
– Supports two 10GE optical ports and two GE
electrical ports via the NIC chip integrated on the
mainboard.
– Supports two 10GE electrical ports and two GE
electrical ports via the NIC chip integrated on the
mainboard.
– The LOM ports support NC-SI, WOL, and PXE.
● FlexIO card
– Supports on-demand
conguration.
– Supports a variety of FlexIO cards. Use the
Computing Product Compatibility Checker to
obtain information about the
specic FlexIO
cards supported.
NOTE
● The electrical ports provided by LOMs, FlexIO cards, and
PCIe NICs cannot be connected to PoE devices (such as a
switch with PoE enabled). Connecting such an electrical
port to a PoE device may cause link communication failure
or even damage the NIC.
● Forcibly powering
o a server will cause intermittent NC-SI
disconnection and disable the WOL function of the LOM
ports. To restore the NC-SI connection, refresh the iBMC
WebUI.
I/O expansion
10 PCIe 3.0 slots:
● One slot dedicated for a screw-in RAID controller
card, one dedicated for a FlexIO card, and eight for
standard PCIe cards.
For details, see 5.7.2 PCIe Slots and 5.7.3 PCIe Slot
Description.
● Support Huawei proprietary PCIe SSD cards to
bolster I/O performance for applications such as
searching, caching, and download services.
NOTE
The preceding information is for reference only. Use the
Computing Product Compatibility Checker to obtain
specic
information.
Huawei FusionServer Pro 5288 V5 Server
Technical White Paper 6 Product Specications
Issue 10 (2020-12-15) Copyright © Huawei Technologies Co., Ltd. 66