2. Tighten the screw to secure the TPM. See (2) in Figure 5-26.
Figure 5-26 Installing the TPM
Step 8 Install the cover.
For details, see 3.6 Installing the Cover.
Step 9 Install the compute node.
For details, see 3.4 Installing a CH121 V5.
Step 10 Power on the compute node.
For details, see 3.2 Power-On Procedure.
Step 11 Enable TPM.
1. Access the BIOS interface.
For details, see Huawei Server Purley Platform BIOS Parameter Reference.
2. Select Security.
3. Select TPM Operation and press Enter.
4. Select Enable.
5. Press F10.
The system displays "Exit Saving changes?" dialog box is displayed.
6. Select Yes.
The settings are saved.
7. Restart the server.
The TPM settings take effect after the server is restarted.
----End
FusionServer Pro CH121 V5 Compute Node
User Guide
5 Optional Part Installation
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 114
To Next Page
Loading...
