Figure 3-4 Removing a compute node
Step 4 Place the removed compute node in an ESD bag.
Place only one compute node in an ESD bag.
Step 5 Install filler panels.
Install filler panels in vacant slots. Otherwise, the ventilation, heat dissipation,
electromagnetic shielding, and dustproof effects of the chassis will be affected.
Insert the filler panel into the chassis horizontally until it clicks into place.
FusionServer Pro CH121 V5 Compute Node
User Guide
3 Basic Operations
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 30
To Next Page
Loading...
