25
Configure Routing
By routing function, a computer network can be achieved between different subnets for data
forwarding, so not in the same subnet as the computer can communicate.
Configure Static Routing
By setting a static route, you can send the information from source IP address to the destination IP
address through a specified path.
1.
Log in to the web management page.
2.
Choose
Internet
tab.
3.
In the navigation tree, choose
Routing Rules
.
4.
Select
Static Routing
configuration page.
5.
Click
New static route
.
6.
In
Destination network address
, enter the IP address of the destination computer that you want to
send information.
7.
In
Destination subnet mask
, enter the subnet mask of the destination computer that you want to
send information.
8.
In
Default gateway
, enter the IP address of the destination computer which will be received the
packet.
9.
In
Source IP address
, enter the subnet mask of the source computer that you want to send
information.
10.
In
Source subnet mask
, enter the subnet mask of the source computer that you want to send
information.
11.
In
Interface
, select a LAN interface that receives packets.
12.
Click
Save
.
To Next Page
Loading...
Need help?
General
