Huawei HG658 V2 User Manual

30
8 USB Device
USB Storage Device
USB storage devices use their USB ports to exchange data with other devices.
You can connect a USB storage device to your HG658 V2 and access the USB device from your
computer.
Both the USB drive and removable hard disk can connect to your HG658 V2.
Your HG658 V2 supports the following file systems for reading and writing.
• FAT32/FAT
• NTFS
• Ext2/3
• HFS+
Connecting a USB Device
After you connect a USB device to your HG658 V2, computers or other devices connected to the
HG658 V2 network can access and share the data in or applications provided by the USB device.
Caution
If you connect a USB device to the HG658 V2, verify that the input voltage and current of the
USB device do not exceed 5 V/0.5 A. Otherwise, the HG658 V2 may malfunction.
You can connect the following USB devices to your HG658 V2:
• USB storage device
• USB printer
Setting the FTP Access Permission
To avoid unauthorized access to the USB storage device, you can set the FTP access permission on
your HG658 V2. This allows only authorized users to access the USB storage device.
Accessing to FTP Server Through the User Name and Password
1. Connect the portable storage device to the HG658 V2's USB port.
2. Enable the FTP server.
a. Log in to the web management page.
b. Choose Share > Storage Share .
c. In Service Settings , select Enable FTP for FTP server.

Huawei HG658 V2 Specifications

General

Model	HG658 V2
Category	Gateway
Wi-Fi Standards	802.11 b/g/n
Frequency Band	2.4 GHz
Ethernet Ports	4
USB Ports	1
Wireless Speed	300 Mbps
WLAN	Yes
Number of LAN Ports	4
LAN Port Type	RJ-45
Number of FXS Ports	2
WAN Ports	1 x RJ-11
Type	Wireless
Security	WEP, WPA, WPA2, WPS