Figure 2-10 Optimal viewing range of indicators
● If the DC indicator and running indicator do not blink red fast and the fault/
maintenance indicator is steady red, replace parts or the entire device.
● Local maintenance refers to the operation that requires inserting a WLAN module into
the USB port of the device, for example, connecting to the SUN2000 app through the
WLAN module.
● If alarms are generated during the local maintenance, the fault/maintenance indicator
shows the local maintenance state rst. After the WLAN module is removed, the
indicator shows the alarm state.
2.4 Circuit Diagram
Figure 2-11 Circuit diagram
2.5 Working Modes
The Smart PCS has three working modes: standby, operating, and shutdown.
LUNA2000-200KTL-H1 Smart Power Control System
User Manual 2 Product Description
Issue 08 (2024-01-23) Copyright © Huawei Technologies Co., Ltd. 22
To Next Page
Loading...