Huawei LUNA2000-200KTL-H1 - Installation Guide; Installation Modes and Site Requirements

4 Installation
4.1 Installation Modes
The Smart PCS can be installed on a support, wall, or DC LV Panel (also referred
to as DCBOX).
Table 4-1 Installation modes
Installation
Mode
Screw Specications Description
Wall
mounting
M12x60 stainless steel expansion bolt Prepared by the
customer
Support
mounting
M12 bolt assembly Prepared by the
customer
DCBOX
mounting
- Purchased from
the Company
4.2 Installation Requirements
4.2.1 Site Selection Requirements
● Do not install the Smart PCS in working or living areas to avoid personal
injury or property loss caused by accidental contact by non-professionals or
other reasons during device operation.
● Do not install the Smart PCS in noise-sensitive areas (such as residential
areas, oce areas, and schools) to avoid complaints. If the preceding areas
are unavoidable, the distance between the installation position and noise-
sensitive areas must be greater than or equal to 40 m.
● If the equipment is installed in a place with abundant vegetation, in addition
to routine weeding, harden the ground underneath the equipment using
cement or gravel (the area shall be greater than or equal to 3 m x 2.5 m).
LUNA2000-200KTL-H1 Smart Power Control System
User Manual 4 Installation
Issue 08 (2024-01-23) Copyright © Huawei Technologies Co., Ltd. 27