Remove a rubber ring strictly based on the cable diameter range and ensure that the
crimping module is not damaged. Otherwise, the IP rating of the device will be aected.
Figure 5-11 Removing a rubber ring
Step 3 Connect the AC power cables to the terminal block and ensure that the cables are
securely connected.
The cable colors shown in the gures are for reference only. Select an appropriate cable
according to the local standards.
Figure 5-12 Single-core cable connection
LUNA2000-200KTL-H1 Smart Power Control System
User Manual 5 Cable Connection
Issue 08 (2024-01-23) Copyright © Huawei Technologies Co., Ltd. 54
To Next Page
Loading...