Figure 8-7 Removing security torx screws
Step 2 Remove the two screws from the upper part of the external fan xing plate and
the two nuts from the lower part. Then, remove the external fan and the xing
plate.
Figure 8-8 Removing the external fan and the xing plate
Step 3 Remove cables from the quick connect port of the external fan, and remove the
external fan from the support.
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 8 Replacing an Air Conditioner
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 96
To Next Page
Loading...
