Huawei LUNA2000-200KWH-2H1 - 8.7 Installing a Single-Phase AC Input Power Cable (Without External Grid Power Supply)

18 Replacing a Water Sensor
Prerequisites
Figure 18-1 Position of the water sensor
Tools: Phillips insulated torque screwdriver, torque wrench
Procedure
Step 1 Remove cables from the water sensor.
Step 2 Remove the faulty water sensor.
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 18 Replacing a Water Sensor
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 131