Huawei LUNA2000-200KWH-2H1 - 8.6 Installing an Auxiliary AC Power Cable (with External Grid Power Supply)

17 Replacing a Door Status Sensor
Prerequisites
Figure 17-1 Positions of door status sensors
● The new door status sensor is intact.
● Tool: Phillips insulated torque screwdriver
Procedure
Step 1 Remove the enclosure of the door status sensor.
Step 2 Unscrew and remove the alarm cables and mark the connection positions.
Step 3 Unscrew and remove the door status sensor.
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 17 Replacing a Door Status Sensor
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 129