Huawei LUNA2000-200KWH-2H1 - 7.4.2 Installing Battery Packs

8.4 Replacing an Air Conditioner
Prerequisites
● Fault locating:
a. Log in to the SmartLogger WebUI, CMU WebUI, FusionSolar app, or
management system to view alarm information.
b. Refer to the alarm handling suggestions in the alarm list.
● Tools:
at-head or Phillips insulated torque screwdriver, multimeter
●
Power-o: Turn o the power switch of the air conditioner in the cabinet.
NO TE
The power loop of the ESS does not need to be powered o. You are advised to set
the ESS in standby or shutdown mode during replacement.
● At least two persons are required to replace the component.
Procedure
Step 1 Remove the air duct.
Figure 8-16 Removing the air duct
Step 2 Remove cables from the air conditioner.
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 8 Replacing an Air Conditioner
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 101