14 Replacing an Embedded Power
Subrack
Prerequisites
Figure 14-1 Position of the embedded power subrack
● Tool: Phillips insulated torque screwdriver
●
Power-o: Turn o the upstream AC input switch for the embedded power
subrack in the cabinet.
Procedure
Step 1 Wear protective gloves.
Step 2 Record the cable connection positions on the embedded power subrack and
disconnect the cables.
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 14 Replacing an Embedded Power Subrack
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 120
To Next Page
Loading...
