Huawei LUNA2000-200KWH-2H1 - 8.8 Installing Communications Cables; 8.8.1 Installing an FE Communications Cable

19 Replacing a T/H Sensor
Prerequisites
Fault locating:
1. Log in to the SmartLogger WebUI, CMU WebUI, FusionSolar app, or
management system to view alarm information.
2. Refer to the alarm handling suggestions in the alarm list.
Figure 19-1 Position of the T/H sensor
Procedure
Step 1 Record the DIP switch settings.
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 19 Replacing a T/H Sensor
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 133