6 Replacing a Battery Pack Fan
Prerequisites
● Fault locating:
a. Log in to the SmartLogger WebUI, CMU WebUI, FusionSolar app, or
management system to view alarm information.
b. Refer to the alarm handling suggestions in the alarm list.
● Tool:
at-head or Phillips insulated torque screwdriver
● Power o the ESS. For details, see 2.2 Powering O a Single ESS.
Procedure
Step 1 Remove the fan and disconnect the cables.
Step 2 Install a new fan and connect the cables.
Step 3 Secure the fan cover.
----End
Follow-up Procedure
Step 1 Power on the system. For details, see the power-on section in the ESS user
manual.
Step 2 Check the running status of the system and ensure that the functions are restored.
----End
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 6 Replacing a Battery Pack Fan
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 85
To Next Page
Loading...
