11.6 Replacing a DC Power Distribution Switch
Figure 11-8 Position of the switch
At least two persons are required to replace the component.
Step 1 Disconnect the cables from the DC power distribution switch, and label the cables.
Step 2 Remove the faulty DC power distribution switch.
Step 3 Install a new DC power distribution switch.
Step 4 Connect the cables based on the labels.
----End
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 11 Replacing a Circuit Breaker
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 115
To Next Page
Loading...
