Huawei LUNA2000-200KWH-2H1 - 9 System Power-On; 9.1 Check Before Power-On; 9.1.1 General Check

22 Replacing an Exhaust Fan
Prerequisites
Figure 22-1 Position of the exhaust fan
● Tool: at-head or Phillips insulated torque screwdriver
● Power o the ESS. For details, see 2.2 Powering O a Single ESS.
Procedure
Step 1 Remove the fan bae plate.
Step 2 Disconnect cables between the fan and the terminals.
Step 3 Unscrew and remove the exhaust fan.
Step 4 Install a new fan and tighten the screws.
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 22 Replacing an Exhaust Fan
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 141