Huawei LUNA2000-200KWH-2H1 - 2.4 Components

Maintena
nce
Category
Maintenance Action Expected Result System
Powered O
or Not
Fire
suppressio
n module
● Check whether the pressure
gauge pointer of the module
is in the green area.
● Clean the module.
● Check that cables are not
damaged, loose, or
disconnected.
● The display is normal.
● The module is clean and free
from dust.
● Cables are intact and securely
connected.
Yes
Note [1]: You are advised to clean the lter after each occurrence of a sandstorm and before
summer in sandstorm-stricken areas. In other areas, clean the lter according to the actual
situation and ensure that the lter or condenser is not blocked. The recommended tool is high
pressure water gun.
Note [2]: Remove cables from the solenoid valve in advance of the test to prevent extinguishant
release.
2.3.4 Annual Maintenance
Table 2-4 Annual maintenance checklist
Maintenan
ce Category
Maintenance Action Expected Result System
Powered O
or Not
Battery
pack
Perform the visual
inspection:
● Appearance
● Rust condition
● Screw
● Fan
● Front panel vent
● There is no obvious damage to the
appearance.
● There is no obvious paint peeling or
rust.
● The screws are secured.
● The fans rotate properly without
abnormal sound.
● The front panel vent is clean and
free from blockage.
Yes
Adapter Check the indicator status. The indicator is steady green. No
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 2 Routine Maintenance
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 27