Step 3 Remove the old embedded power subrack.
Step 4 Install a new embedded power subrack.
Step 5 Remove the components from the old embedded power subrack and install them
on the new embedded power subrack.
Step 6 Reconnect the cables to the new embedded power subrack based on the recorded
information.
Step 7 Remove the protective gloves.
----End
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 14 Replacing an Embedded Power Subrack
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 121
To Next Page
Loading...
