Step 2 Remove copper bars and cables from the battery pack.
Figure 5-2 Removing copper bars and cables
Step 3 Remove the front panel of the battery pack.
Figure 5-3 Removing the front panel of the battery pack
Step 4 Remove the three at cables from the management module and wrap them with
insulation tape.
Figure 5-4 Removing the
at cables
LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual 5 Replacing a Battery Management Module
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd. 79
To Next Page
Loading...
