Step 5 Install the protective cover delivered with the product, connect a ground cable to
the protective cover on the left or right side, and bind the cable.
Figure 8-9 Connecting a ground cable
----End
8.5 Installing a DC Power Cable
Prerequisites
The DC power cable has been pre-buried.
Procedure
Step 1 Remove the bae plate in front of the power distribution area.
Step 2 Route the DC power cable through the cable hole at the bottom and connect it to
the DC circuit breaker.
LUNA2000-200KWH-2H1 Smart String ESS
User Manual 8 Installing Cables
Issue 03 (2023-03-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 108
To Next Page
Loading...
