Step 2 After the software upgrade is complete, the SmartLogger automatically restarts.
Log in to the SmartLogger WebUI again 2 minutes later.
----End
10.4 Resetting the ESU
Step 1 Choose Monitoring > ESU > Running Param., click in the upper right corner,
and wait for 2 minutes.
Step 2 Choose Monitoring > ESR, click +, and verify that the ESM-1 to ESM-12 status
indicators under the ESR are all green or yellow.
Figure 10-7 Checking the status
Step 3 Choose Monitoring > ESM > About and check the software versions of ESM-1 to
ESM-12.
Figure 10-8 Checking the ESM software version
● If the software version of ESM-1 to ESM-12 is not FusionSolar V100R023C00SPC100 or
later, upgrade the ESU.
● Obtain the upgrade package from the Company.
Step 4 (Optional) Choose Maintenance > Software Upgrade, upload the upgrade
package, select the device, and upgrade the ESU.
LUNA2000-200KWH-2H1 Smart String ESS
User Manual 10 SmartLogger Web-based Deployment
Issue 03 (2023-03-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 132
To Next Page
Loading...
