Figure 10-22 Settings complete
----End
10.6 (Optional) System Startup
Context
Start up the system when needed.
Procedure
Step 1 On the SmartLogger WebUI, choose Maintenance > Device Mgmt. > Connect
Device.
Step 2 Click
in the upper right corner to start devices in batches.
Figure 10-23 System startup
----End
10.7 Checking Alarms
Step 1 Check whether an alarm is generated on the SmartLogger WebUI or CMU WebUI.
If an alarm is generated, handle the alarm by referring to the handling
suggestions in the alarm reference section.
LUNA2000-200KWH-2H1 Smart String ESS
User Manual 10 SmartLogger Web-based Deployment
Issue 03 (2023-03-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 141
To Next Page
Loading...
