Huawei LUNA2000-200KWH-2H1 - Pre-Installation Check; Installing the ESS

Insulated shoes Reective vest
Safety helmet Safety harness
7.1.2 Pre-installation Check
Checking the Outer Packing
Before unpacking the equipment, check the outer packing for damage, such as
holes and cracks, and check the equipment model. If any damage is found or the
equipment model is not what you requested, do not unpack the product and
contact your dealer as soon as possible.
NO TE
You are advised to remove the outer packing within 24 hours before installing the
equipment.
WARNING
If the cabinet is higher than 2 m, take protective measures for working at heights
during unpacking.
Checking Deliverables
After unpacking the equipment, check that the deliverables are intact and
complete, and free from any obvious damage. If any item is missing or damaged,
contact your dealer.
NO TE
For details about the number of accessories delivered with the equipment, see the Packing
List in the packing case.
7.2 Installing the ESS
Step 1 Remove the bae plate from the bottom of the ESS.
LUNA2000-200KWH-2H1 Smart String ESS
User Manual 7 Installation
Issue 03 (2023-03-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 76