Huawei LUNA2000-200KWH-2H1 - Deployment Wizard

Figure 10-9 Upgrading the ESU
Step 5 Choose Monitoring > ESU > Running Param., click in the upper right corner,
and wait for 2 minutes.
Step 6 Choose Monitoring > ESM and check
in the upper right corner to ensure that
no major alarm is generated.
----End
10.5 Deployment Wizard
Procedure
Step 1 Log in as admin to access the deployment wizard page.
Step 2 Set parameters following the deployment wizard. For details, see Help on the
page.
NO TE
During parameter setting, click Previous, Next, or Skip as required.
1. Set basic parameters.
Figure 10-10 Setting basic parameters
After setting the parameters, select a communication mode based on the site
requirements.
LUNA2000-200KWH-2H1 Smart String ESS
User Manual 10 SmartLogger Web-based Deployment
Issue 03 (2023-03-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 133