Huawei LUNA2000-200KWH-2H1 - 7.4.4 Installing the Smart PCS

Figure 8-10 Connecting the DC power cable
NO TE
● Reserve sucient length of the cable and add angle steel in the middle of the
foundation to support the cable and reduce the stress on the cable.
● For details about how to install other cables for the Smart PCS, see the corresponding
quick guide.
----End
8.6 Installing an Auxiliary AC Power Cable (with
External Grid Power Supply)
Prerequisites
The AC power cable has been pre-buried.
NO TICE
Obtain the AC auxiliary power from the mains or a reliable power supply. Do not
directly obtain power from the AC side of renewable energy inverters such as PV
inverters and wind power converters.
Procedure
Step 1 Route the AC power cable through the cable hole at the bottom and connect it to
the MCB.
LUNA2000-200KWH-2H1 Smart String ESS
User Manual 8 Installing Cables
Issue 03 (2023-03-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 109