Huawei LUNA2000-213KTL-H0 - Label Description

Table 2-3 Working mode description
Working
Mode
Description
Standby The Smart PCS enters standby mode when the external
environment does not meet the operating requirements. In standby
mode:
● The Smart PCS continuously detects its operation status. Once
the operation conditions are met, the Smart PCS enters
operating mode.
● If the Smart PCS detects a shutdown command or a fault after
startup, it enters shutdown mode.
Operating In operating mode:
● The Smart PCS controls charge and discharge based on system
commands.
● The Smart PCS enters shutdown mode after detecting a fault or
receiving a shutdown command.
● In the on-grid state, you are advised to set the Smart PCS to
work in hot standby mode, which reduces the no-load loss
when the Smart PCS is operating with zero power. For details,
see 7.3 Setting the Hot Standby Mode.
Shutdown ● In standby or operating mode, if the Smart PCS detects a
shutdown command or a fault, it enters shutdown mode.
● In shutdown mode, the Smart PCS enters standby mode when a
startup command is received and faults are rectied, the DC
power is insucient, or the DC external switch is turned o.
2.6 Label Description
Table 2-4 Enclosure labels
Symbol
Name Meaning
Operation warning Potential hazards exist after the
device is powered on. Take
protective measures when working
on the device.
High temperature hazard Do not touch the device, as the
enclosure is hot when the device is
running.
Electric shock hazard Hazardous voltage exists after the
device is powered on. Take
protective measures during
operation and maintenance (O&M).
LUNA2000-213KTL-H0 Smart Power Control System
User Manual 2 Product Description
Issue 04 (2024-12-30) Copyright © Huawei Technologies Co., Ltd. 23