8.4 Replacing a Fan
Precautions
● Before replacing a fan, power o the Smart PCS.
● When replacing a fan, use insulated tools and wear PPE.
Procedure
Step 1 Remove the screws from the fan tray and store them properly. Pull out the fan
tray until it is ush with the maintenance compartments of the Smart PCS.
If the fan gets stuck when being pulled, slightly lift the fan tray.
Figure 8-3 Pulling out the fan tray (1)
Step 2 Remove the cable ties shared by the cables, unscrew the connectors, and
disconnect the cables.
LUNA2000-213KTL-H0 Smart Power Control System
User Manual 8 Device Maintenance
Issue 04 (2024-12-30) Copyright © Huawei Technologies Co., Ltd. 82
To Next Page
Loading...