No. Category Status (Blinking Fast: On
for 0.2s and O for 0.2s;
Blinking Slowly: On for 1s
and O for 1s)
Meaning
O The DC side is not properly connected,
or the auxiliary power supply inside the
device is not working.
2 Running
indication
Steady green The device is operating in grid-tied
mode.
Steady yellow The device is operating in o-grid mode.
Blinking green slowly The system environment is normal but
the device is not in the working state.
Blinking red fast An environmental fault occurred on the
AC side.
O The AC side is not connected to the
power grid.
3 Communication
indication
Blinking green fast The device receives data through
northbound FE communication.
O The device has not received data
through northbound FE communication
in at least 10s.
4 Fault/
Maintenance
indication
Steady red A major alarm was generated on the
device.
Blinking red fast A minor alarm was generated on the
device.
Blinking red slowly A warning was generated on the device.
Blinking green slowly The device is under local maintenance
or shut down after receiving a
command.
O There is no alarm, and no local
maintenance operations are performed.
----End
7.2 Commissioning the Smart PCS
The Smart PCS is commissioned together with the whole energy storage solution
and can be commissioned on the SmartLogger WebUI or FusionSolar app.
● SmartLogger WebUI: The SmartLogger can manage multiple devices. For
details about the commissioning procedure, see the quick guide for the
corresponding solution.
LUNA2000-213KTL-H0 Smart Power Control System
User Manual 7 Power-On and Commissioning
Issue 04 (2024-12-30) Copyright © Huawei Technologies Co., Ltd. 75
To Next Page
Loading...