Communications Ports
Figure 5-12 Port description
(1) FE network port 2 (2) FE network port 1
(3) COM network port 1 (4) COM network port 2
5.6.1 Installing FE Communications Cables
The Smart PCSs connect to the SACU (model: SmartACU2000D-D-11) over FE
communications cables. Ensure that the two ends connect to the GE2–GE8 ports
of the SACU (SWITCH02). A maximum of three ring networks are supported.
Figure 5-13 Connecting FE communications cables (to the SmartACU2000D-D-11)
Procedure
Step 1 (Optional) Prepare a network cable.
LUNA2000-213KTL-H0 Smart Power Control System
User Manual 5 Cable Installation
Issue 04 (2024-12-30) Copyright © Huawei Technologies Co., Ltd. 58
To Next Page
Loading...