Huawei LUNA2000-213KTL-H0 - Power-On and Commissioning; Powering on the Smart PCS

7 Power-On and Commissioning
7.1 Powering On the Smart PCS
Prerequisites
● Ensure that all the items in 6 Check Before Power-On are checked and meet
the requirements before power-on.
Precautions
D ANGER
● Wear personal protective equipment and use dedicated insulated tools to avoid
electric shocks or short circuits.
NO TICE
● Before turning on the AC switch between the Smart PCS and the power grid,
check whether the AC voltage is within the allowed range using a multimeter.
(See the local power grid standard.)
● Before the equipment is put into operation for the rst time, ensure that the
parameters are set correctly by professional personnel. Incorrect parameter
settings may result in noncompliance with local grid connection requirements
and aect the normal operations of the equipment.
● If the Smart PCS has not been used for six months or longer after being
installed, it must be checked and tested by professionals before operation.
Procedure
Step 1 Turn on the AC switch between the AC side of the Smart PCS and the transformer
station.
LUNA2000-213KTL-H0 Smart Power Control System
User Manual 7 Power-On and Commissioning
Issue 04 (2024-12-30) Copyright © Huawei Technologies Co., Ltd. 73