----End
5.6 Installing Communications Cables
To ensure normal communication, install cables to both FE and COM
communications ports.
● For FE communications ports, all Smart PCSs need to be connected in a ring
network in hand-in-hand mode using FE communications cables.
● For COM communications ports, if one battery rack corresponds to one Smart
PCS, the Smart PCS is directly connected to the ESS. If one battery rack
corresponds to multiple Smart PCSs, these Smart PCSs need to be connected in
hand-in-hand mode using COM communications cables.
● The communications cables delivered with the Smart PCS are 1.2 m long. Use
the original cables if possible.
LUNA2000-213KTL-H0 Smart Power Control System
User Manual 5 Cable Installation
Issue 04 (2024-12-30) Copyright © Huawei Technologies Co., Ltd. 57
To Next Page
Loading...