Figure 5-16 Connecting a plastic housing
(1) Shielded plug (2) Plastic housing (3) Coupling nut
(4) Sealing ring (5) Sealing nut -
Step 3 Insert the sealing ring into the plastic housing and secure the coupling nut to the
plastic housing.
Figure 5-17 Connecting a sealing ring and a coupling nut
Step 4 Secure the sealing nut to the plastic housing.
Figure 5-18 Connecting a sealing nut
Ensure that the sealing nut is secured.
Step 5 Route the FE1 cable through the cable hole on the left and the FE2 cable through
the cable hole on the right. Insert the plugs into the FE ports on the Smart PCS
and tighten the coupling nuts.
LUNA2000-213KTL-H0 Smart Power Control System
User Manual 5 Cable Installation
Issue 04 (2024-12-30) Copyright © Huawei Technologies Co., Ltd. 60
To Next Page
Loading...