Huawei P Smart 2019 User Manual

2 Touch or touch a held call in the call list to switch between the two calls.
Enable Call Forwarding
After the Call forwarding feature is enabled, calls that meet set conditions will be
automatically transferred to a specied phone number.
This feature requires the support of your mobile carrier. For details, contact your carrier.
1 On the Phone screen, go to > Settings, and touch Call forwarding under the SIM
card you wish to disable call forwarding on.
2 Select and enable a forwarding method, then enter and
conrm the target number.
Features may vary depending on your network provider.
Disable Call Forwarding
1 On the Phone screen, go to > Settings, and touch Call forwarding under the SIM
card you wish to disable call forwarding on.
2 Select the forwarding mode that you wish to disable and disable it.
Features may vary depending on your network provider.
Apps
48

Huawei P Smart 2019 Specifications

General

Resolution	1080 x 2340 pixels
Processor	HiSilicon Kirin 710
CPU	Octa-core (4x2.2 GHz Cortex-A73 & 4x1.7 GHz Cortex-A53)
GPU	Mali-G51 MP4
RAM	3 GB
Battery	3400 mAh
Operating System	Android 9.0 (Pie), EMUI 9
Weight	160 g
Dimensions	155.2 x 73.4 x 8 mm
SIM	Single SIM (Nano-SIM) or Dual SIM (Nano-SIM, dual stand-by)
Network	GSM / HSPA / LTE
Display	6.21 inches
Storage	64 GB
Rear Camera	13 MP + 2 MP
Front Camera	8 MP (f/2.0)
Colors	Midnight Black, Aurora Blue