Shoot in Portrait, Night, and Wide Aperture Modes
Shoot in Portrait, Night, and Wide Aperture Modes
Use Portrait Mode to Shoot Portraits
Portrait mode lets you apply beauty, lighting, and blur 
eects to your photos to shoot
stunning portraits.
1 Open  Camera and select Portrait mode.
2 Frame your subject in the viewnder.
To take a sele, touch  .
3 You can also:
• Enable beauty eect: Touch   and drag the slider to adjust beauty settings. A larger
value will produce a more distinct beauty eect. To disable the beauty eect, drag
each setting to its lowest value.
• Set blur and lighting eects: Touch   and select blur and lighting eects to your
liking.
4 Touch   to take a photo.
Take Night Shots
Night mode solves the issues caused by low light and night shooting to give your photos
sharper details and brighter colours.
You can also use Night mode when shooting backlit subjects and scenes with 
owing water,
such as waterfalls, to create a better contrast or a smooth, silky water eect.
1 Open  Camera and select Night mode.
2 If you are using the rear camera, touch   on the viewnder to adjust the ISO sensitivity
or   to adjust the shutter speed.
3 Keep your device steady and touch 
.
4 Your device will adjust the exposure time based on the ambient brightness. Keep your
device steady.
Do not stop shooting before the countdown nishes or your photos may come out blurry.
Edit Background Blur in Wide Aperture Photos
You can adjust the focus and background blur after you've taken a wide aperture photo.
1 Go to 
Gallery > Albums > Camera.
Camera and Gallery
29