2 In the list of Paired devices, touch next to the name of the device you wish to unpair,
then touch Unpair.
Mobile Data
Connect to Mobile Data
1 Make sure that mobile data is available on your SIM card.
2 Connect to mobile data using either of the following methods:
• Swipe down from the status bar to open the notication panel, then swipe down
further to show all shortcut switches. Touch to enable Mobile data.
• Go to Settings > Mobile network > Mobile data and enable Mobile data.
To conserve battery power and reduce data usage, disable the mobile data service when you
don't need it.
Manage SIM Cards
You can enable or disable SIM cards and name them for easier identication.
Enable or Disable a SIM Card
Go to Settings > Mobile network > SIM management, and turn on or o the switch for
SIM 1 or SIM 2 according to your preferences.
Once disabled, a SIM card cannot be used for calling, messaging, or accessing the Internet.
Name Your SIM Card
You can name your SIM cards for easier identication and management. For example, you
could mark one SIM card as "Work" and the other as "Personal".
Go to Settings > Mobile network > SIM management and touch to edit the SIM
card name.
Congure Dual SIM Settings
If your device has two SIM cards inserted, you can set one as the default mobile data SIM
and the other as the default calling SIM, or set call forwarding between the two SIM cards.
This feature applies to dual-SIM devices only.
Set a Default Mobile Data and a Default Calling SIM
Go to Settings > Mobile network > SIM management and set SIM 1 or SIM 2 as the
default mobile data or default calling SIM.
Settings
73
To Next Page
Loading...
Need help?
General
