EasyManua.ls Logo

Huawei P8 lite - Page 51

Huawei P8 lite
171 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Once your phone is connected to a Wi-Fi network, it will display the icon in the status
bar
. Your phone will remember Wi-Fi networks that you have used before and reconnect to
them automatically.
Connecting to a Wi-Fi network using WPS
WPS allows your phone to connect to a WPS-enabled router without having to remember a
password.
1 Open
Settings.
2 T
ouch Wi-Fi and switch on Wi-Fi.
3 Touch
> Advanced W
i-Fi settings. There are four options:
l Touch WPS connection and press the router's WPS button.
l Touch WPS PIN connection to generate a PIN, and then enter the PIN on the router.
Once your phone is connected to a Wi-Fi network, it will display the
icon in the status
bar
. Your phone will remember Wi-Fi networks that you have used before and reconnect to
them automatically.
Using Wi-Fi+
When Wi-Fi+ is enabled, your phone will automatically enable or disable Wi-Fi and connect to
the Wi-Fi network with the best signal.
You may incur additional data charges when downloading large files or watching online
videos over mobile data. T
o avoid incurring excessive data charges, purchase a data plan.
Contact your carrier for details.
1 Open
Settings.
2 T
ouch Wi-Fi > Wi-Fi+ and turn on the Wi-Fi+ switch.
When Wi-Fi+ is enabled, your phone will record your Wi-Fi connection history and monitor
your signal strength and location. This information is then used to enable or disable Wi-Fi and
connect to the Wi-Fi network with the strongest signal.
l Smart switching between Wi-Fi and mobile data: Evaluates available Wi-Fi networks
and automatically connects to the best network (a small amount of Wi-Fi data may be
used to perform a connectivity test). If Wi-Fi connectivity is poor, your phone will revert to
mobile data. To configure the default network selection settings, go to your mobile
network settings.
l Turn on/off Wi-Fi automatically: Automatically enables or disables Wi-Fi based on your
location and your Wi-Fi connection history.
l Evaluate available Wi-Fi networks: Automatically monitors the signal strength and
connection speeds of nearby public hotspots. Your phone will only connect to hotspots
that have a working Internet connection.
Network and Sharing
45

Table of Contents

Other manuals for Huawei P8 lite

Related product manuals