1.51 Why can't the Bluetooth headset display its battery
level?
Certain headsets don't support the display of battery level, which has nothing to do with your
phone.
1.52 What is Wi-Fi+?
When you activate the Wi-Fi+ feature on EMUI 3.1, your phone will carry out connectivity
tests on the available Wi-Fi networks, which may increase Wi-Fi data usage. The main
features of Wi-Fi+ plus include:
1. Automatically enable/disable Wi-Fi based on previous connection history.
2. Switch between Wi-Fi and mobile data networks depending on the signal strength (you
will be prompted when the phone switches from a Wi-Fi network to a mobile data
network).
3. You can disable these prompts by selecting Do not remind again.
1.53 How can I enable/disable Wi-Fi+?
You can enable/disable Wi-Fi+ in EMUI 3.1 by going to Settings > Wireless and
Networks > More > Link+ > Wi-Fi+.
1.54 Under what circumstances will Wi-Fi+ enable/disable
Wi-Fi?
When you are connected to your home Wi-Fi network, Wi-Fi+ will disable Wi-Fi when your
phone leaves the range of the cellular network tower nearest to your home. When you return
home, Wi-Fi+ will automatically enable Wi-Fi and connect to your home network.
1.55 When Wi-Fi+ is enabled, why do I receive a prompt
stating "Network was previously detected as having no
Internet access, automatic connection disabled"?
This may be because your phone previously detected the network as having no Internet access,
therefore it will not automatically connect to the network in future. Nevertheless, you can still
connect to the network manually.
To Next Page
Loading...
