Huawei S6700 Series

RelayNextHop : :: TunnelID : 0x0
Interface : Vlanif10 Flags : D
Destination : FE80:: PrefixLength : 10
NextHop : :: Preference : 0
Cost : 0 Protocol : Direct
RelayNextHop : :: TunnelID : 0x0
Interface : NULL0 Flags : D
# Run the ping command to verify the configuration.
[Switch A] ping ipv6 3::1
PING 3::1 : 56 data bytes, press CTRL_C to break
Reply from 3::1
bytes=56 Sequence=1 hop limit=254 time = 63 ms
Reply from 3::1
bytes=56 Sequence=2 hop limit=254 time = 62 ms
Reply from 3::1
bytes=56 Sequence=3 hop limit=254 time = 62 ms
Reply from 3::1
bytes=56 Sequence=4 hop limit=254 time = 63 ms
Reply from 3::1
bytes=56 Sequence=5 hop limit=254 time = 63 ms
--- 3::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 62/62/63 ms
# Run the tracert command to verify the configuration.
[Switch A] tracert ipv6 3::1
traceroute to 3::1 30 hops max,60 bytes packet
1 2::1 31 ms 32 ms 31 ms
2 3::1 62 ms 63 ms 62 ms
----End
Configuration Files
l Configuration file of Switch A
#
sysname Switch A
#
ipv6
#
vlan batch 10 20
#
interface Vlanif10
ipv6 enable
ipv6 address 1::1/64
#
interface Vlanif20
ipv6 enable
ipv6 address auto link-local
#
interface XGigabitEthernet0/0/1
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
interface XGigabitEthernet0/0/2
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
ipv6 route-static :: 0 vlanif20 FE80::218:20FF:FE00:80
#
return
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 1 IP Static Route Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17