EasyManua.ls Logo

Huawei S6700 Series

Huawei S6700 Series
664 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Run:
system-view
The system view is displayed.
2. Run:
ip community-filter
A community filter is configured.
To configure a standard community filter, run the ip community-filter { basic
comm-filter-name { permit | deny } [ community-number | aa:nn ]
*
&<1-9> |
basic-comm-filter-num { permit | deny } [ community-number | aa:nn ]
*
&<1-16> } [ internet | no-export-subconfed | no-advertise | no-export ]
*
command.
To configure an advanced community filter, run the ip community-filter
{ advanced comm-filter-name | adv-comm-filter-num } { permit | deny } regular-
expression command.
l Configure an extcommunity filter.
Similar to a BGP community filter, a BGP extcommunity filter is used to filter private
network routes.
Perform the following steps on a BGP switch:
1. Run:
system-view
The system view is displayed.
2. Perform either of the following operations as required to configure an extcommunity
filter.
To configure a basic extcommunity filter, run the ip extcommunity-filter { basic-
extcomm-filter-num | basic basic-extcomm-filter-name } { deny | permit } { rt
{ as-number:nn | ipv4-address:nn } } &<1-16> command.
To configure an advanced extcommunity filter, run the ip extcommunity-filter
{ adv-extcomm-filter-num | advanced adv-extcomm-filter-name } { deny |
permit } regular-expression command.
Multiple entries can be defined in an extcommunity filter. The relationship between
the entries is "OR". This means that if a route matches one of the rules, the route
matches the filter.
l Configure a route-policy.
A route-policy is used to match routes or route attributes, and to change route attributes
when specific conditions are met. As the preceding filters can be used as matching
conditions of a route-policy, the route-policy is powerful in functions and can be used
flexibly.
Perform the following steps on a BGP switch:
1. Run:
system-view
The system view is displayed.
2. Run:
route-policy route-policy-name { permit | deny } node node
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 7 BGP Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
388

Table of Contents

Other manuals for Huawei S6700 Series

Related product manuals