Huawei SUN2000-12KTL User Manual

SUN2000 (8KTL-28KTL)
User Manual
7 Man-Machine Interaction
Issue 10 (2017-07-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
99
LCD Screen
Procedure
6. Manually shut down the SUN2000.
a. Choose Power-Off and press .
b. Press again to confirm the operation.
----End
7.2.13 Restoring Factory Settings
Factory settings for the SUN2000 can be restored on the monitoring panel. The operation will
restore all configured parameters except the current date and time to their factory settings. The
operation will not impact alarm records, system logs, and operating information.
Context

Perform this operation with caution because all configured parameters except the current
date and time will be restored to their factory settings.

If PV strings are grounded, install a three-phase four-wire isolation transformer and set
Isolation to Input Grounded, With TF.
Procedure

The following table lists the procedure for restoring factory settings. The parameter
values in the figures are for reference only.

Huawei SUN2000-12KTL Specifications

General

Max. Efficiency	98.6%
Rated AC Power Output	12, 000 W
Dimensions (W x H x D)	525 x 470 x 262 mm
Weight	25 kg
Operating Temperature Range	-25°C to +60°C
Protection Rating	IP65
Max. Input Voltage	1100 V
Number of MPPT Trackers	2
Max. Input Current per MPPT	22 A
Cooling Method	Natural Convection
Max. apparent AC power	12000 VA
MPPT Voltage Range	200 V to 1, 000 V
Rated AC Voltage	220 V / 380 V, 230 V / 400 V, 240 V / 415 V
Warranty	5 years